Shenzhen PM-9000 Express Manual del operador descargar pdf (Pagina 203)

Parameter values of channel 2: Systolic pressure, mean pressure and diastolic pressure

(from the left to the right). When ART or ICP is selected for CH1 and CH2 respectively,

the ICP and CPP values will be displayed, where CPP is equal to the mean pressure of

ART minus ICP.

PR numeric

15.2 Precautions

WARNING

•

Use only the IBP transducer specified in this operation manual. Disposable IBP

transducers or domes should not be reused.

•

Parts and accessories used must meet the safety requirements of the medical

electrical equipment standards.

•

The need for the operator to avoid conductive connection to the applied part

likely to degrade safety. (For example, by not contacting metal cocks, if used.)

•

When the monitor is used with high frequency surgical equipment, do not allow

the transducer and the cable contact the high frequency surgical equipment to

prevent the patient from burning caused by leakage current.

•

Verify transducer cable fault detection before beginning to monitor. Unplug the

transducer cable from the IBP connector on the monitor. The screen will display

the error message “IBP SENSOR OFF” and an audible alarm will be heard.

The transducer (except for the ICT/B transducer) specified in this operation manual is able to

protect against electrical shock, especially the leakage current, and the interference of cardiac

defibrillation. It can be used in surgical operation. During defibrillation, the pressure

waveform might become temporarily distorted. However, the monitor returns to normal

operation after the defibrillation, with the operation mode and the user configuration being

unaffected.

NOTE

•

Periodically calibrate the transducer according to the Hospital Regulation.

15-2

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 338 339

Shenzhen PM-9000 Express Manual del operador Pagina 203